Help

How to import FCPXML into DaVinci Resolve or Final Cut Pro

In DaVinci Resolve, choose File > Import > Timeline (Shift-Command-I on a Mac), select the .fcpxml file and click Import, then relink any clips that come up missing. In Final Cut Pro, choose File > Import > XML, select the file and click Import.

Starting from a recording? Make the timeline from it: Hound cuts it in the browser and exports this file. Your first video is free, no card.

Takehound's editor downloads one .fcpxml timeline, and so does the older B-roll tool. Below are the steps from Blackmagic's and Apple's own documentation, what is in each file, and what to check when clips come up missing.

Import the timeline into DaVinci Resolve

  1. Open a project in DaVinci Resolve.
  2. Choose File > Import > Timeline. On a Mac the shortcut is Shift-Command-I.
  3. Select your .fcpxml file and click Open (in Resolve 21.1 the button reads Import).
  4. If Resolve shows a window of import settings, check them and click OK.
  5. If clips come up missing, relink them to your footage folder.

Checked 2026-10-07 in DaVinci Resolve 21.1 on a Mac, the free version from the Mac App Store, with a timeline the older B-roll tool cut from a recording. The window in step 4 is titled Load XML. With its settings left as they were, the recording came in on V1 with its sound, 32 shots came in on V2, and none of the clips needed relinking.

The editor's file was opened in the same DaVinci Resolve 21.1 on 2026-10-11, 2026-10-12 and 2026-10-13. On 2026-10-13 a first pass of my own talk came in with the talk on V1 as 53 clips and one track of sound, my clips on V3 over their copies on V2, 16 titles of words on screen and 24 notes as switched-off titles. Those files had my footage's real folder written in, so the relink was not part of the check. Final Cut Pro has not opened one of the editor's files. For Final Cut, the editor's test files are checked against Apple's own definition of FCPXML 1.9, which shows how a file is written, not how it looks.

Source: Blackmagic Design's DaVinci Resolve 18.5 New Features Guide (PDF, April 2023, page 10), read 2026-10-03. Blackmagic writes steps 2 to 4 there for OpenTimelineIO timeline files, and says to relink when the media is not in the same place as the original. For the relink commands, use the Reference Manual for your version, such as the DaVinci Resolve 20 Reference Manual (PDF, about 200 MB when checked 2026-10-03).

The older B-roll tool

Let Resolve build the cut, with the reasons as markers

For a cut from the older B-roll tool, Resolve can run a small Takehound script from its own menu. The script builds the timeline inside Resolve: your recording on V1, your shots on V2, and markers that carry Takehound's reasons. A blue marker means a shot was placed there. A yellow one means the line stays on you. The editor's file needs no script: its reasons come into Resolve as switched-off titles.

  1. Once: download the Takehound script and put it in Resolve's Scripts folder, inside the folder named Utility. In the Finder, choose Go > Go to Folder and paste the path. For Resolve from the Mac App Store it is ~/Library/Containers/com.blackmagic-design.DaVinciResolveLite/Data/Library/Application Support/Fusion/Scripts/Utility. For Resolve from Blackmagic's site, the README inside Resolve gives ~/Library/Application Support/Blackmagic Design/DaVinci Resolve/Fusion/Scripts/Utility.
  2. For each cut: fill in the folder paths on the result page as you would for the timeline file, then choose Save this cut for Takehound's Resolve script.
  3. In Resolve, open a project, choose Workspace > Scripts > Takehound and pick the file you saved.

Checked 2026-10-07 in DaVinci Resolve 21.1 on a Mac, the free version from the Mac App Store. The script appeared in the menu without a restart, a cut file saved in Downloads opened, and a cut of 40 shots came in with 65 markers and nothing to relink. The script adds one bin and one timeline to the open project and changes nothing else. Not checked: Windows, Resolve Studio, and the version from Blackmagic's site.

Open the FCPXML timeline in Final Cut Pro

  1. In Final Cut Pro, choose File > Import > XML.
  2. Go to your .fcpxml file, then click Import.

Apple's guide adds that you can double-click the file in the Finder instead. A Takehound file holds one event with one project, both named like the file.

If clips are missing, Apple's relink page describes them as red frames with yellow alert triangles. Select them, choose File > Relink Files > Original Media, click Locate All, go to your footage folder, click Choose, then click Relink Files.

Sources: Apple's Final Cut Pro User Guide, Use XML to transfer projects and Relink clips to media files, both read 2026-10-03.

The format

What an FCPXML file is

An FCPXML file is a plain text file that describes an edit in XML. Apple's Final Cut Pro guide presents it as a way to move the details of clips, projects, events and libraries between Final Cut Pro and apps from other makers. The file holds no video: Apple's developer documentation says it gives each media file as a URL that points to where the file is.

Sources: Apple's Final Cut Pro User Guide, Use XML to transfer projects, and Apple's developer documentation, Creating FCPXML Documents, both read 2026-10-04.

The file

What a Takehound export contains

From the editor

File
One .fcpxml file, FCPXML version 1.9, from the Timeline for DaVinci Resolve button at the top of the editor, named after your project, or after its recording if you never named it. No video is inside it.
Tracks
Your talk on the main track as the stretches the cut kept, end to end with their sound, each push-in as a zoom. Your clips, photos, slides and screen recordings on the tracks above, picture only, on the frames the editor put them on. Behind an upright clip, a sharp copy of it scaled to fill the frame, for you to blur.
Words
Your key lines on screen come in as titles you can edit, on tracks above the footage. In Resolve each comes in as a Text title with its words, size, colour and place. A card's title names its look's font (Montserrat for Bold, Inter or Instrument Serif for Clean), and without that font installed Resolve sets it in another. A card's designed look is only in the MP4: here its words are a plain title where the card sat, for you to restyle.
Notes
The reason for each change, your bookmarks and what the file could not carry are markers, a part of Final Cut's format that Resolve drops. Since 2026-10-11 each note is also a title that is switched off, on tracks of their own above the rest, and Resolve keeps those: on its timeline each reads Text - and the start of its words. Switch one on to read it in the viewer.
Left out
Named in the notes: a clip's speed, effects, masks and colour grade, and the cleaned sound of your recording (the file links to the recording as you shot it, and the MP4 has it cleaned). With no note: a clip's position, rotation, opacity, volume levels and keyframes. A clip that sat beside you comes in fitted to the frame, for you to lay out.
Frame
Your project's frame rate and size. Each clip is listed at that rate.
Paths
A browser is never told where a file is on your disk, so the file says each clip is in one folder named Takehound. Your clips come in missing until you relink them once, by pointing Resolve or Final Cut at the folder your footage is in.

From the older B-roll tool

File
One .fcpxml file (FCPXML version 1.9), named after your footage folder with -cut on the end. No video is inside it. It points at your clips by file path.
Tracks
From a talking-head recording: your recording on the bottom track (V1, with its sound) and your shots above it (V2, muted). From a pasted script: the shots only, each a muted, video-only clip on the track above the main one, which is left empty for your recording.
Markers
Each cutaway has a marker: the first words of the script line it covers, then Takehound's reason for the pick. Where Takehound left a line as a gap there is no clip, only a marker that starts with GAP, or with STAY ON CAMERA when the cut was made from a recording. DaVinci Resolve 21.1 did not show these markers after import (checked 2026-10-07). Two ways to keep the reasons: save the list of picks from the result page, a text file that lists each line with its shot and the reason, or use the Resolve script, which puts them on the timeline as markers.
Timing
From the transcript of your recording, when you add one. From a pasted script, estimated at 2.5 words a second.
Frame
30 frames per second, 1920×1080 (16:9).
Paths
The folder path you typed, then each clip's place inside that folder. If your editor says media is offline, relink by pointing Resolve or Final Cut at that folder.

After import

Then do your 20%

From the editor: relink once, then switch on a note where you want the reason, blur the copy behind each upright clip and restyle the titles that stand for cards. From the older B-roll tool:

  1. If you added your recording, it is already on the bottom track with its sound. If you pasted a script, add your recording on the main track, under the cutaways: the timeline is silent until you do.
  2. Go through the cutaways with the list of picks beside you: it gives the line and the reason for each. From a pasted script, slide each cutaway to the words it covers.
  3. Remove the cutaways you would not have chosen. The lines the list marks "stay on camera" have no cutaway.

On my own 50-second talk, cut with the Mac version, Takehound proposed 5 cutaways and I kept 3. The lines are in B-roll ideas for coaches.

Missing clips

The folder path decides whether your clips link

The editor asks for no path: its file puts each clip in one folder named Takehound, and you relink once. In the older B-roll tool, after you choose a folder, Takehound asks where it is on your computer. What you type becomes the start of each clip's path in the file.

  • On a Mac

    Path field
    Type or paste the full path of the folder you chose, starting with /. It has to be that folder, not the one above it.
    To copy it
    In the Finder, choose View > Show Path Bar. Control-click the folder in the path bar, then choose the Copy as Pathname item. Source: Apple's Mac User Guide, Get file, folder, and disk information on Mac, read 2026-10-03.
    After import
    The file points at each clip inside that folder.
  • On Windows

    Path field
    Leave it blank. It only takes paths that start with /.
    After import
    The file carries a placeholder path, so the clips come up missing. Relink them in DaVinci Resolve.

Sending the file to an editor? They relink to their own copy of the footage. More in what to hand your editor.

Troubleshooting

If something looks wrong

  • Clips are missing or offline. The paths in the file do not match where the clips are. A file from the editor always comes in this way: relink once to the folder your footage is in. From the older tool the cause is a blank or mistyped path field, a folder moved after the download, or a different computer. Relink in Resolve or Final Cut. On a Mac, with the older tool still open, you can also fix the path and download again.
  • The reasons are not in Resolve. Resolve drops markers. From the editor, the reasons are the switched-off titles on the top tracks: switch one on to read it. From the older tool, save the list of picks or use the Resolve script.
  • The words look plain, or an upright clip has a sharp copy of itself around it. A card's designed look and the blur behind an upright clip are only in the MP4 the editor exports. Here the words are titles to restyle and the copy behind the clip is sharp: add a blur to it.
  • The older tool asks for the full folder path and will not download. The field only takes a path that starts with /. On a Mac, paste the path as copied above. On Windows, clear the field, download, then relink in Resolve.
  • No sound, gaps in the picture, cutaways early or late. Expected for a cut the older tool made from a pasted script: the cutaways are muted, your recording is not in the file, lines with no match are left empty, and timing comes from the script's word count. A cut from your recording has its sound on the bottom track.
  • Phone footage looks washed out in Resolve. HDR clips from an iPhone looked flat in a new Resolve 21.1 project until color management was turned on. In File > Project Settings > Color Management, set Color science to DaVinci YRGB Color Managed, leave Automatic color management ticked with Color processing mode on SDR and Output color space on SDR Rec.709, then click Save. Checked 2026-10-07.
  • You filmed yourself in Cinematic mode. Export the recording from Photos with the first item under File > Export, not Export Unmodified Original. In one test (2026-10-07) the unmodified original had everything in focus, and the ordinary export had the blurred background the phone showed.
  • The frame rate is not the one you shot at. The older tool's file is 30 frames per second whatever your footage is, and the editor's is your project's rate. Both list each clip at the file's rate. Apple's relink page says a relinked file must have the same frame rate, so if Final Cut will not relink a clip, compare the two.

No timeline yet?

Takehound's editor makes this file, and Hound makes its first pass. A transcript isn't the cut, so on a talk he watches the cut as moving picture and sound before he changes anything, and again after: he hears where each cut lands and sees what is already on screen, the checking a chat assistant or a coding tool leaves to you. Press one button and watch him: he cuts long pauses, filler words and repeated takes, places your own clips, photos, slides and screen recordings where you talk about them, leaves a gap where none of them fits and puts your key lines on screen, with a reason for every change in a feed. Steer him in plain words, undo any step or edit by hand, and he learns how you cut.

Then export an MP4 from the browser, or this timeline for you or your editor to finish in DaVinci Resolve, not Premiere. Final Cut has not opened one. Sign in with Google for a free first video.

See how Takehound works

Questions

How do I import an FCPXML file into DaVinci Resolve?

Blackmagic's documentation writes the timeline import command as File > Import > Timeline (Shift-Command-I on a Mac). Select the .fcpxml file and click Open, then relink any missing clips to your footage folder. Source: DaVinci Resolve 18.5 New Features Guide, read 2026-10-03.

How do I open an FCPXML timeline in Final Cut Pro?

Apple's user guide says to choose File > Import > XML, go to the file and click Import. You can also double-click the file in the Finder. Source: Final Cut Pro User Guide, read 2026-10-03.

What is an FCPXML file?

A plain text file that describes an edit in XML. Apple's Final Cut Pro guide presents it as a way to move the details of clips, projects, events and libraries between Final Cut Pro and apps from other makers. Source: Final Cut Pro User Guide, read 2026-10-04.

What is the difference between .fcpxml and .fcpxmld?

A .fcpxmld is a bundle. Apple's Final Cut Pro guide says Final Cut Pro uses bundles with that extension when it exports FCPXML version 1.10 or later. Apple's developer reference says a bundle keeps the FCPXML and the files it refers to together. A Takehound download is one .fcpxml file, version 1.9. Sources: Final Cut Pro User Guide and FCPXML Bundle Reference, read 2026-10-04.

Why are my clips missing after I import a Takehound timeline?

The file holds no video. It points at each clip by file path. A file from Takehound's editor names one folder, Takehound, for every file, since a browser is never told where your files are, so relink once to the folder your footage is in. A file from the older B-roll tool uses the path you typed, so relink any clip that is not at that path on this computer.

Where can I download the DaVinci Resolve 20 Reference Manual?

Blackmagic Design publishes it as a PDF: the DaVinci Resolve 20 Reference Manual, about 200 MB when checked 2026-10-03. For the relink commands, use the manual for the version of Resolve you have.

Does a Takehound timeline open in Premiere?

No. It exports FCPXML, which opens in DaVinci Resolve. Tools that hand off to Premiere are in AI B-roll from your own footage.

More guides

All guides

Let Hound make your first pass

Hound, Takehound's editor, watches and listens to your talk, cuts the pauses and retakes, places your own footage and says why for every change. Sign in with Google for a free first video, up to 30 minutes.

Start free with Google

No card, no install. Privacy